Protective Film - 7210
Home Finishes Cut to Length Warehousing Architectural Finishes Protective Film Industry Links Contact Us
PRODUCT DESCRIPTION
A 2 mil LDPE product for general surface protection and/or shipping. The custom formulated acrylic adhesive system offers a "lower adhesion" product with minimal adhesion build even during extended application.
SUGGESTED END USE
Bright Annealed Stainless, Mirror Finish Stainless, Smooth Acrylic, Smooth Polycarbonate
FEATURES BENEFITS
Removable Clean, stain free removal...even after application for extended periods of time
Conformable Lighter gauge backing offers increased conformability and flexibility
Easy Application The controlled unwind allows for application using either manual or automatic methods
TECHNICAL DATA
Total thickness 3 mils
Tensile strength 7 lbs/inch
Elongation 300%
Standard roll width (inches) 36", 48", 60"
Standard roll length 600', 1000', 1500', 3000'
Backing LDPE
Adhesive type Acrylic
Color Clear
AAdhesion, pstc 1 2 oz/inch
Note: The above are typical values and should not be used in writing specifications.

The performance of all adhesive products is affected by many factors: heat, humidity, type of substrate, texture, inks used and application technique. Our suggestions and recommendations concerning the use and application of our products are based on tests we believe are reliable. However, the purchaser must test the suitability of our products for their intended use under their own operating conditions. Excelsior Steel Processing assumes no liability for claims beyond the replacement value of any defective products, and is in no way liable for consequential or incidental damages. These products are not suitable for prolonged outdoor exposure.