| PRODUCT DESCRIPTION |
| A 3 mil LDPE product for general surface protection on mill finishes, such as standard steel polishers grade, during fabrication and/or shipping. The custom formulated acrylic adhesive offers a "medium adhesion" product with minimal adhesion build. |
| SUGGESTED END USE |
| Smooth and Matte Polycarbonate, Medium Polish Stainless Steel, Smooth Formica, Anodized Aluminum, Mill Finish Aluminum, Painted Metals |
| FEATURES |
BENEFITS |
| Removable |
Clean, stain free removal...even after application for extended periods of time |
| Conformable |
Product remains intact... even after extreme bending |
| Easy Application |
The controlled unwind allows for application using either manual or automatic methods |
| TECHNICAL DATA |
| Total thickness |
2.7 mils |
| Tensile strength |
6 lbs/inch |
| Elongation |
325% |
| Standard roll width (inches) |
36", 48", 60" |
| Standard roll length |
200, 334, 500, 1000 |
| Backing |
LDPE |
| Adhesive type |
Acrylic |
| Color |
Clear, White or Blue |
| Adhesion, pstc 1 |
6 oz/inch |
Note: The above are typical values and should not be used in writing specifications.
The performance of all adhesive products is affected by many factors: heat, humidity, type of substrate, texture, inks used and application technique. Our suggestions and recommendations concerning the use and application of our products are based on tests we believe are reliable. However, the purchaser must test the suitability of our products for their intended use under their own operating conditions. Excelsior Steel Processing assumes no liability for claims beyond the replacement value of any defective products, and is in no way liable for consequential or incidental damages. These products are not suitable for prolonged outdoor exposure. |
