Protective Film - 7316
Home Finishes Cut to Length Warehousing Architectural Finishes Protective Film Industry Links Contact Us
A 3 mil LDPE product engineered for protection of textured surfaces or surfaces requiring a higher adhesion product during shipping and/or moderate fabrication. The acrylic adhesive system offers a "high adhesion" product with minimal adhesion build.
HP Laminate/Textured, Fabricating Laminates/Satin, Painted "Textured" Steel Aluminum
Removable Clean, stain free removal...even after application for extended periods of time
Conformable Product remains intact... even after extreme bending
Easy Application The controlled unwind allows for application using either manual or automatic methods
Total thickness 2.8 mils
Tensile strength 8 lbs/inch
Elongation 325%
Standard roll width (inches) 36", 48", 60"
Standard roll length 200, 334, 500, 1000
Backing LDPE
Adhesive type Acrylic
Color Clear
Adhesion, pstc 1 16 oz/inch
Note: The above are typical values and should not be used in writing specifications.

The performance of all adhesive products is affected by many factors: heat, humidity, type of substrate, texture, inks used and application technique. Our suggestions and recommendations concerning the use and application of our products are based on tests we believe are reliable. However, the purchaser must test the suitability of our products for their intended use under their own operating conditions. Excelsior Steel Processing assumes no liability for claims beyond the replacement value of any defective products, and is in no way liable for consequential or incidental damages. These products are not suitable for prolonged outdoor exposure.