Protective Film - 6560
Home Finishes Cut to Length Warehousing Architectural Finishes Protective Film Industry Links Contact Us
PRODUCT DESCRIPTION
High grade saturated paper backing with specially formulated latex pressure sensitive (P/S) adhesives for general purpose use as pre-space and application tapes.

TransferRite® UltraTM products are specially designed for use over ready-to-apply graphics because of improved adhesion to liner..
PRODUCT SPECIFICATIONS
Tape Thickness
PSTC-33
4.3 mils
Adhesion to Steel
PSTC-101 (180┬░, oz./in.)
19 oz/inch
Low
Tensile Strength
PSTC-31 (lbs./in.)
20
Elongation
PSTC-31 (%)
3%
Note: The above are typical values and should not be used in writing specifications.

The performance of all adhesive products is affected by many factors: heat, humidity, type of substrate, texture, inks used and application technique. Our suggestions and recommendations concerning the use and application of our products are based on tests we believe are reliable. However, the purchaser must test the suitability of our products for their intended use under their own operating conditions. Excelsior Steel Processing assumes no liability for claims beyond the replacement value of any defective products, and is in no way liable for consequential or incidental damages. These products are not suitable for prolonged outdoor exposure.